back
 # fdisk -l
 
 Disk /dev/sda: 80.0 GB, 80026361856 bytes
 255 heads, 63 sectors/track, 9729 cylinders
 Units = cylinders of 16065 * 512 = 8225280 bytes
 Disk identifier: 0xc76fc76f
 
    Device Boot      Start         End      Blocks   Id  System
 /dev/sda1   *           1        5139    41278986    7  HPFS/NTFS
 /dev/sda2            5140        9696    36604102+   f  W95 Ext'd (LBA)
 /dev/sda3            9697        9729      265072+  83  Linux
 /dev/sda5            5140        9696    36604071    7  HPFS/NTFS
 
 Disk /dev/hdb: 122.9 GB, 122942324736 bytes
 255 heads, 63 sectors/track, 14946 cylinders
 Units = cylinders of 16065 * 512 = 8225280 bytes
 Disk identifier: 0x98917e7c
 
    Device Boot      Start         End      Blocks   Id  System
 /dev/hdb1               2       14946   120045712+   f  W95 Ext'd (LBA)
 /dev/hdb5               2       14946   120045681    7  HPFS/NTFS
 
 Disk /dev/sdb: 81.9 GB, 81964302336 bytes
 255 heads, 63 sectors/track, 9964 cylinders
 Units = cylinders of 16065 * 512 = 8225280 bytes
 Disk identifier: 0x0006b329
 
    Device Boot      Start         End      Blocks   Id  System
 /dev/sdb1   *           1        2432    19535008+  83  Linux
 /dev/sdb2            2433        6079    29294527+  83  Linux
 /dev/sdb3            6080        6322     1951897+  82  Linux swap / Solaris
 /dev/sdb4            6323        9964    29254365    f  W95 Ext'd (LBA)
 /dev/sdb5            6323        9964    29254333+   7  HPFS/NTFS
hddtemp

Descrizione

Il programma hddtemp monitora e crea rapporti sulla temperatura dei seguenti hard disk PATA, SATA o SCASI con la lettura delle informazioni da Self-Monitoring Analysis and Reporting Technology (SMART) sulle unità che supportano questa caratteristica.

Installazione

# apt-get install hddtemp

Utilizzo

Per maggiori informazioni man hddtemp, hddtemp -h; sotto un'esempio di utilizzo.

 # hddtemp /dev/sda
 /dev/sda: ST380023AS: 30°C
back